| CS110M Conference Splitter | Key
Features Electronically balanced input Ten electronically balanced outputs Selectable Mic/Line output level
click on image to enlarge it |
||
| Description | |||
| The CS110M is a high quality microphone distribution amplifier which distributes a controlled microphone signal to ten outputs. Each output can be independently switched to high or low level to interface with a wide variety of recording equipment. The unit is designed to enable any output to be connected to unbalanced equipment without affecting overall gain. | |||
| Features | |||
| Inputs: | One balanced microphone input via a rear panel mounted XLR connector. Once the coarse level control has been adjusted to suit the microphone and application a slow release level controller maintains the output level. Phantom power (48v), is available for those microphones that require it. | ||
| Outputs: | Ten electronically balanced low impedance outputs. Each output has an associated front panel switch to insert a 40dB pad in the output, enabling it to be fed to the microphone input of most audio recorders. The outputs will drive both balanced and unbalanced circuits without affecting the gain of other outputs. | ||
| Connectors: | All audio inputs and outputs via 3 pin rear panel XLRs. | ||
| Options | Transformer balanced input | ||
| Applications | |||
| The CS110M has been designed to be installed in hotels and conference centres where there is a requirements to distribute one microphone to several users, for instance at press conferences, with the absolute minimum of supervision. The venue needs only to plug in the microphone and make a simple set-up adjustment. The CS110M will then control the output level so that it is consistent from speaker to speaker whether they are softly spoken or more strident. The familiar clutter of microphones in front of the speaker is eliminated. | |||
| Related Products | |||
| Audionics manufactures a wide range of high quality audio equipment including distribution amplifiers, audio routing matrices, mixing amplifiers and audio mixers. The WM85 is a small (1U, 19") rackmount mixing unit, ideal for installation alongside the CS110 in conference rooms. | |||
| Technical Specifications | |||
| Input Impedance | 1k8 ohms | ||
| Maximum Input | +22dB | ||
| Output Impedance | 50 ohms | ||
| Maximum Output | +24 dBu | ||
| Line Gain Adjust | +6dB, -14dB | ||
Frequency Response |
±0.5dB, 10Hz-24kHz | ||
Distortion (THD + Noise) |
<0.05%, 100Hz-10kHz @+20dBu | ||
| Noise | -120dBu EIN, 20Hz-20kHz | ||
| Dimensions | 1U (44mm) high, 260mm deep | ||
| Power | 220-240v, 20W | ||
| Weight | 5kg | ||
