eMU-22 - 12 Output Slave PDU - Ver2   Key Features

20A Powercon Input

16A Input Fuse

12 Individually Fused IEC Outputs (6A)

Sequential Power On

Power Shedding

LAN Control via LAN Enabled eMU-2M

External Temperature Sensors

Current Measurement

1U x 250mm Deep

click on image to enlarge it

Datasheet

   
Description  
The eMU-2S is a 2nd generation development of the popular eMU-S with new temperature and current measurement features. The eMU-2S is a twelve output power distribution unit that can be remotely controlled and monitored from an eMU-2M.  
     
Features  
Inputs: 20A 'Powercon' connector with front panel 16A fuse.  
Outputs: Twelve 6A individual fused IEC output.  
Status LED: Front panel LEDs show the status of each output.
ON – Output relay is on and the fuse is OK
OFF – Output relay has been switched off
FLASH – Output relay is on but fuse blown
 
Sequential Switch
On:
On power up the outputs can be programmed to switch on sequentially to avoid switch on current surges.  
Power Shedding: Outputs can be setup as non critical, so in the event of needing to reduce the power load, these outputs can be ‘shed’ by a single closing contact input.  
Embedded Web
Server:
The status, control and setup can be accessed via standard web browsers (if it is connected to a LAN enabled eMU-2M).  
LAN Control: A TCP socket protocol enables the eMU-M to be controlled by third user developed or third party software like Crestron or AMX (if it is connected to a LAN enabled eMU-2M).  
Email Alerts: Fuse failure and ups on/off event notification via SMTP (if it is connected to a LAN enabled eMU-2M).  
Temperature Sensor: Two rear panel connectors for optional external temperature sensors.Critical temperature alerts can be sent via email.  
Current Measurement: Overall current consumption can be monitored via the web browser.  
Options: Rear cable tiebar.
External temperature sensors
   
Dimensions: 1U x 250mm deep    
Weight: 3kg    
       
Alternative Products: See the full range of power distribution units