| eMU-ACO-S - 10 Output Dual Input Slave PDU | Key
Features 2 x 20A Powercon Input 16A Input Fuse 10 Individually fused IEC Outputs (6A) Auto Input Changeover Sequential Power On Power Shedding LAN Control via LAN Enabled eMU-ACO-M External Temperature Sensors Current Measurement 1U x 250mm Deep
click on image to enlarge it |
||
| Description | |||
| The eMU-ACO-S is a ten ouput power distribution unit with dual auto changeover inputs. It can be remotely controlled and monitored from an eMU-ACO-M (LAN Enabled PDU). | |||
| Features | |||
| Inputs: | Dual 20A ‘Powercon’ connector with front panel 16A fuse. | ||
| Outputs: | Ten 6A individual fused IEC outputs. | ||
| Status LED: | Front panel LEDs show the status of each output. | ||
| ON - Output relay is on and the fuse is OK | |||
| OFF - Output relay has been switched off | |||
| FLASH - Output relay is on but fuse blown | |||
| Auto Changeover: | Automatic changeover on input failure (<32ms). Front panel switch for manual selection of input. LEDs show selected default input and status of each input. | ||
| Sequential
Switch On: |
On power up the outputs can be programmed to switch on sequentially to avoid switch on current surges. | ||
| Power Shedding: | Outputs can be setup as non critical, so in the event of needing to reduce the power load, these outputs can be ‘shed’ by a single closing contact input. | ||
| Embedded Web Server: |
The status, control and setup can be accessed via standard web browsers (if it is connected to a LAN enabled eMU-ACO-M). | ||
| LAN Control: | A TCP socket protocol enables the eMU-M to be controlled by third user developed or third party software like Crestron or AMX (if it is connected to a LAN enabled eMU-ACO-M). | ||
| Email Alerts: | Fuse failure, input failure and ups on/off event notification via SMTP (if it is connected to a LAN enabled eMU-ACO-M). | ||
| Temperature Sensor: |
Two rear panel connectors for optional external temperature sensors. Critical temperature alerts can be sent via email. | ||
| Current Sensor: |
Overall current consumption can be monitored via the web browser. | ||
| Options: | Rear cable tiebar. External temperature sensors |
||
| Dimensions: | 1U x 250mm deep | ||
| Weight: | 3kg | ||
| Alternative Product: | See the full range of power distribution units | ||
