| ePS LAN Enabled AC Power Switch | Key
Features IEC Power Connector Input 6.3A Output Fuse 0.5m IEC lead output Embedded Web Server PCAlive - Monitor the health of devices Email Alerts Simple Socket Control Protocol Username/ Password Protection
click on image to enlarge it |
||
| Description | |||
| The ePS is a stand alone unit which has an embedded web server to control AC power on any device via LAN/WAN/Internet. Ideal for equipment rebooting or for energy saving applications by switching off unused remote equipment. | |||
| Features | |||
| Input: | IEC power connector (230V & 110V version available) | ||
| Outputs: | 0.5m IEC lead with 6.3A panel mounted fuse. | ||
| Status LED: | Panel mounted LED shows the status of the output. | ||
| ON - Output relay is on and the fuse is OK | |||
| OFF - Output relay has been switched off | |||
| FLASH - Output relay is on but fuse blown | |||
| PCAlive: | The ePS can continuously ping an IP address to check the health of the device. If the IP address fails to respond after a user defined period the ePS power cycles it's output to reboot the device. | ||
| Remote Control: | An internal Ethernet control module enables the ePS to be remotely controlled vai a LAN/WAN or the Internet. | ||
| Embedded Web Pages - The status, control and setup can be accessed via standard web browsers. | |||
| Email Alerts - Fuse failure and cold boot event notification via SMTP. | |||
| Third Party Software - Simple socket protocol can be used to control the ePS by third party software eg. AMX, Crestron, Visual Basic, C++.. | |||
| RS232 - The RS232 port can be used for both configuration and control of the output. | |||
| Alternative Product: | eMU - LAN Enabled, 12 output mains distribution unit | ||
