| MR102 Mixing Amplifier | Key
Features 10 Inputs 2 Outputs Stereo or dual mono mode Inputs feed any or all outputs Electronically balanced inputs and outputs will also interface with to unbalanced equipment Individual gain adjustment on each output
click on image to enlarge it |
||
| Description | |||
| The MR102 mixer is a ten input, two output, fixed gain, line level mixer, housed in a 1U, 19" rackmount case with integral mains power supply. The unit is designed to enable any input or output to be connected to unbalanced equipment without affecting overall gain. | |||
| Features | |||
| Inputs: | Ten electronically balanced, high impedance inputs, which can be operated in stereo or dual mono mode. Inputs are via rear panel mounted XLR connectors. The five stereo inputs are mixed onto a stereo output bus. | ||
| Outputs: | Two electronically balanced, low impedance outputs. Each output has independent gain adjustment of +6dB/-14dB, which enables the mixer to drive domestic equipment directly. The outputs will drive both balanced and unbalanced circuits without affecting the gain of the other output. | ||
| Connectors: | All audio inputs and outputs via 3 pin rear panel XLRs. | ||
| Options | Transformer Balanced Outputs. | ||
| Applications | |||
| The MR102 has been designed to provide the user with a method of mixing several line level sources. Applications include cue feed mixing, the combining of outputs of several audio machines, or the mix down of multiple computer assisted playout machines to one mixing desk input. | |||
| Technical Specifications | |||
| Input Impedance | 36k ohms | ||
| Maximum Input | +22dB | ||
| Output Impedance | 50 ohms | ||
| Maximum Output | +24 dBu | ||
| Output Gain Adjust | +6dB, -14dB | ||
| Crosstalk | <80dB @ 10kHz | ||
Frequency Response |
±0.5dB, 10Hz-24kHz | ||
Distortion (THD + Noise) |
<0.01%, 100Hz-10kHz @+10dBu | ||
| Noise | -80dBu peak, 20Hz-20kHz | ||
| Dimensions | 1U (44mm) high, 260mm deep | ||
| Power | 220-240v, 20W | ||
| Weight | 5kg | ||
